Liquid level sensors W015HKS, RW-015HKL, NW1, etc.

Float systems for horizontal mounting
Float systems of horizontal mounting are used to control the liquid level with a single contact. A float with a magnet built into it is located on the surface of the liquid. When a certain level is reached, the float acts on the adjustable magnetically sensitive contacts
MODELS: RW-015HKS, RW-015HKL, RWI, NW1, A-U1-2, NW3, MW3, MW1, VECTIS

Float sensors with vertical mounting
Vertical mounting level indicators are made in the form of measuring cups of various lengths to control the level and visual properties of the liquid. Vertical mounting float systems of various lengths and designs are used to signal one or more liquid level positions. The float is mechanically connected to a microswitch, causing it to trigger when a certain level of liquid in the tank is reached.
MODELS: NBS, NM-007HP, NM-004HK, NM-008HK, NMS-004HM040, NMS-004HM047, NMS-004HM077, SB, NR, NR-000, LC, FLEX-LC, OMNI-LC.

Capacitive sensors
Capacitive measuring systems are used for continuous monitoring of the level of electrically conductive liquids. The sensor of the capacitive level gauge is an electric capacitor. When the liquid level in the tank changes, the relative permittivity of the space between the capacitor plates changes, causing a corresponding change in its electrical capacity.
MODELS: LCC1.

Calorimetric sensors
Calorimetric level detectors of liquid and crushed bulk materials are used for laboratory installations. The action of the calorimetric sensor is based on the recognition of the difference between media (in this case, liquid and air) by their thermal conductivity: when it changes, it triggers
MODELS: LABO-LK012 (ELK12).

Ultrasonic sensors
Ultrasonic measuring systems are used for continuous monitoring of the level of liquid and bulk materials without direct contact with the measured medium. The ultrasonic sensor measures the distance to the surface of the liquid, bulk materials and other solids in the tank and outputs an analog signal proportional to the measured distance
MODELS: LS20, EL, OMNI-L.

Membrane sensors
Membrane pressure sensors are used for continuous monitoring of the liquid level. Sensitive membranes located at the end of the submersible probe convert the pressure of the liquid column into a proportional electrical signal. MODELS: LS10, IL10, LK10.

Measuring cups
Main Features:

• Installation location/Mounting length, mm - Tank wall / 40 ... 300
• Measurement environment/ Material - Water, oil/Brass
• Process connection - External thread G 3/8" A, optional 1/2"A
• Operating conditions, Py / Tmax - - / -20 ... + 80º C

MODELS: NB, NA

Vibration level detectors
Technical specifications:

• Installation location/Mounting length, mm - Tank or pipeline wall / 66, 69
• Measurement environment/Material - Liquids with a dynamic viscosity of 0.1...10000 MPa s / Stainless steel
• Technological connection - External thread G 3/4, 1" A
• Output - PNP transistor output, contactless switch
• Operating conditions, Py / Tmax - - 1...+64 bar/ -40 ... + 100º C

MODELS: VSS51

DOCUMENTATION

• LABO/RW/NW/MW/NM/FLEX/OMNI. Technical specifications